The Crossfire Car Audio we know today was originally founded in the early ’90s as Paramount Audio (Paramount, California). It was founded to offer high-performance, affordable amplifiers. Today, Crossfire is sold in over 25 countries and is known for its innovative amplifiers. In this blog post, we will take a closer look at some of Crossfire’s equipment. To take a closer look at Jarrett Willis’s Crossfire build, click here. To take a closer look at Amber Martinez’s Crossfire build, click here. To take a closer look at DJ-G’s (2DoorKing) Crossfire build, click here.
Link to Crossfire Car Audio Official Website
Amplifiers
C3 Series
The C3 Series Feature:
- Fan Cooling
- SMD Dedicated Audio Chip Devices
- FR-4 Double Sided Fiberglass PCB Boards
- High-Efficiency MOSFET Power Supplies
- 1 Ohm Stable Mono Operation
- Variable Low-Pass Crossover
- Variable Bass Boost Control
- Power On & Protection LED Indicators
- Short-Circuit / Thermal / Overload / Under Voltage Protection
Amplifier | Rated Power @ 12.5v | Total Power @ 12.5v | Dimensions |
C3-500D | 500w x 1 Channel @ 1 Ohm | 500w Mono | 8.2″ L x 6.6″ W x 2″ H |
C5 Series
The C5 Series Class A/B Feature:
- Bridgeable
- 5 Way Protection Circuit
- Mosfet PWM Power Supply
- Power / Protection Indicator
- Variable High-Pass / Low-Pass Crossover
- 2 Ohms Stable Stereo
- Variable 45 Hz Bass Boost (2 Ch. & Mono Block)
- 4 Ohms Stable Bridged
Amplifier | Rated Power @ 12.5v | Total Power @ 12.5v | Dimensions |
C5-500.2 | 125w x 2 Channels @ 4 Ohms Stereo | 500w x 1 Channel @ 4 Ohms Bridged | 14″ L x 8.7″ W x 2.4″ H |
C5-400.4 | 50w x 4 Channels @ 4 Ohms Stereo | 200w x 2 Channels @ 4 Ohms Bridged | 13.2″ L x 8.7″ W x 2.4″ H |
C5-800.4 | 100w x 4 Channels @ 4 Ohms Stereo | 400w x 2 Channels @ 4 Ohms Bridged | 16.4″ x 8.7″ x 2.4″ H |
The C5 Series Class D Feature:
- Strapable Monoblock Amplifier
- 5 Way Protection Circuit
- Mosfet PWM Power Supply
- Analog Subwoofer Level Controller
- Double Sided PC Board
- Power / Protection Indicator
- Variable 24 dB / Octave Crossover
- 1 Ohm Stable / 2 Ohms Stable Strapped
- Variable 45 Hz Bass Boost
Amplifier | Rated Power @ 12.5v | Total Power @ 12.5v | Dimensions |
C5-800D | 800w @ 1 Ohm | 800w Mono | 11″ L x 8.7″ W x 2.4″ H |
C5-1600D | 1600w @ 1 Ohm | 1600w Mono | 11.8″ L x 8.7″ W x 2.4″ H |
C7 Series
The C7 Series Feature:
- Digital Class-D Strapable Mono Block Amplifier
- Dual MOSFET PWM Power Supply
- Stable Into 1 Ohm Mono Load
- 24 dB / Octave, Variable Low-Pass Crossover
- 24 dB / Octave, Variable Subsonic Filter
- 9 dB / Octave, Variable Bass Boost
- 180 Variable Phase Shift
- 4 Way Protection Circuit
- Subwoofer Level Controller Included
- C7-2k and C7-4k Working Voltage From 8.5V ~16
Amplifier | Rated RMS Power @ 12.5v | Rated RMS Power @ 12.5v | Rated RMS Power @ 12.5v | Dimensions |
C7-2k | 2,000w@ 1 Ohm Mono | 1,200w @ 2 Ohm Mono | 800w @ 4 Ohm Mono | 18.9″ L x 9.29″ W x 2.48″ H |
C7-4k | 4,000w @ 1 Ohm Mono | 2,200w @ 2 Ohm Mono | 1,200w @ 4 Ohm Mono | 23.25″ L x 9.29″ W 2.48″ H |
XT Series
The XT Series Feature:
- XT-6K, 8K, Strapable Mono Block Amplifiers
- Dual MOSFET PWM Power Supply
- Stable Into 1 Ohm Mono Load
- 24 dB / Octave, Variable Low-Pass Crossover
- 24 dB / Octave, Variable Subsonic Filter
- 9 dB / Octave, Variable Bass Boost (N/A on XS-16K)
- 180 Variable Phase Shift
- 4 Way Protection Circuit
- Subwoofer Level Controller w/ Clipping Indicator Included
- Working Voltage From 8.5V ~16V
Amplifier | Rated RMS Power @ 12.5v | Rated RMS Power @ 12.5v | Rated RMS Power @ 12.5v | Dimensions |
XT-6k | 6,000w @ 1 Ohm Mono | 3,500w @ 2 Ohm Mono | 1,800w @ 4 Ohm Mono | 28.35″ L x 11.35″ W x 2.6″ H |
XT-8k | 8,000w @ 1 Ohm Mono | 4,800w @ 2 Ohm Mono | 2,600w @ 4 Ohm Mono | 32.30″ L x 11.35″ W x 2.6″ H |
XT-16k | 16,000w @ 1 Ohm Mono | 10,000w @ 2 Ohm Mono | 5,600w @ 4 Ohm Mono | 39.35″ L xx 11.35″ W x 2.6″ H |
Subwoofers
C3 Series
The C3 Series Feature:
- 2.5” 4 Layer Copper Voice Coil On Aluminum Former
- High Density High Roll Foam Surround
- Bumped & Vented Backplate
- Ergonomic Push Terminals
- Woven Stitched Tinsel Leads
- Wrap Around Embossed Logo Gasket
- Available In 10”, 12” Sizes
Subwoofer | Size | Voice Coil | RMS Power | Max Power | Magnet Weight | Mounting Depth |
C3 10D2-V3 | 10″ | 2.5″ Dual 2 Ohm | 400w | 800w | 80 oz. | 5.90″/150 mm |
C3 10D4-V3 | 10″ | 2.5″ Dual 4 Ohm | 400w | 800w | 80 oz. | 5.90″/150 mm |
C3 12D2-V3 | 12″ | 2.5″ Dual 2 Ohm | 400w | 800w | 80 oz. | 6.6″/168 mm |
C3 12D4-V3 | 12″ | 2.5″ Dual 4 Ohm | 400w | 800w | 80 oz. | 6.6″/168 mm |
C5 Series
The C5 Series Feature:
- High Grade Y35 Ferrite Motor Assembly
- Vented Aluminum Cast Frame
- 2.5” / 2.75” Extended High Temperature Copper Voice Coil
- High Strength Non Pressed Paper Cone
- Dual Stitched High Density High Roll Surround
- Multi Layer Nomex Spider Suspension
- Woven Stitched “XL” Multi Strand Tinsel Leads
- Available In 8”, 10”, 12”, 15” Sizes
Link to C5 Series ($199.00-$279.00)
C7 Series
The C7 Series Feature:
- High Grade Y35 250 oz. Motor Assembly
- 3” Aluminum Flat Wound High Temperature Hybrid Composite Voice Coil
- Extended 6 Spoke Cast Frame
- Semi-Pressed Paper Cone
- Wide Roll Double Stitched Surround
- Dual Stitched Flat XL Tinsel Lead Wires
- Multi-Layer Nomex Spider Suspension
- Dual 1 Ohm And 2 Ohm Voice Coil Options
- 1600 Watts RMS Power Handling
- Available In 12”, 15”, 18” Sizes
Subwoofer | Size | Voice Coil | RMS Power | Magnet Weight | Mounting Depth |
C7 12D1/D2-V3 | 12″ | 3″ Aluminum Flat Wound | 1,600w | 250 oz. | 8.95″/227mm |
C7 12D1/D2-V3 | 15″ | 3″ Aluminum Flat Wound | 1,600w | 250 oz. | 9.30″/236mm |
C7 18D1/D2-V3 | 18″ | 3″ Aluminum Flat Wound | 1,6000w | 250 oz. | 10.70″/271 mm |
Link to C7 Series ($459.00-$529.00)
XT3 Series
The XT3 Series Feature:
- Triple Stack 925 oz. Motor Structure Assembly
- FEA Optimized Motor
- Massive 3” 8 Layer Aluminum Voice Coil
- Chrome Plated 25mm Top & Back Plate
- Solid Hybrid Tapered Extended Pole Piece
- Precise Circular Velosity Controlled Rear Perimeter Venting
- Pressed Kraft Fiber Reinforced Cone
- Multi-Layer Wide Roll Foam Surround
- Advanced 10″ Quad Layer Progressive Roll Spaced Spider Suspension
- Dual Round XL Woven & Stitched Tinsel Leads
- True Carbon Fiber Dustcap (Multiple Logo Color Options Available
- Oversized 4 AWG Nickel Plated Push Terminals (Custom Order Direct Leads Available)
- Custom Tooled Embossed Motor Boot
- Dual .5 And Dual 1 Ohm Voice Coil Options (Custom Order Dual .35, .7, And 1.4 Available)
- 3000 Watts RMS Power Handling
- Available In 12″, 15”, And 18” Models
Driver Description 12″ 15″ 18″ Fs 35 Hz 32 Hz 30 Hz Re 2.8 Ohm 2.8 Ohm 2.8 Ohm Qms 8.19 8.39 8.55 Qes 0.42 0.46 0.51 Qts 0.4 0.43 0.48 Mms 365 g 436 g 485 g Cms 0.06 mm/N 0.06 mm/N 0.06 mm/N Sd 480 cm^2 810 cm^2 1210 cm^2 Vas 18 L 51 L 118 L Spl 88.2 dB 91.3 dB 93.1 dB BL 24.53 24.53 24.53 X-Maz 34mm 34mm 34mm Outer Diameter 12.50″ 15.625″ 18.50″ Inner Diameter 11.125″ 14.125″ 16.75″ Mounting Depth 9.625″ 10.75″ 11.875″ Driver Displacement 0.20 ft³ 0.22 ft³ 0.25 ft³ Power Handling (RMS) 3,000w 3,000w 3,000w
Link to XT3 Series ($750.00-$820.00)
Coaxials and Components
C3 Series
The C3 Series Feature:
- Injection Molded Poly Cone
- 13mm PEI Dome Tweeter
- Butyl Rubber Surround
- Shallow Mounting Depth
- 80 Watts Max Power Handling
Speaker | Size | RMS Power | Max Power | Mounting Depth |
C3 652 | 6.5″ 2-Way | 40w | 80w | 2.2″/56mm |
C5 Series
The C5 Series Feature:
- UV Protected Glass / Carbon Fiber Cone
- 19mm Silk Dome Tweeter
- Protective Magnet Boot
- 80 – 150 Watts Power Handling
Speaker | Size | RMS Power | Max Power | Mounting Depth |
C5 402 | 4″ 2-Way | 40w | 80w | 2″/52 mm |
C5 482 | 4×6″ 2-Way | 40w | 80w | 2.1″/55 mm |
C5 522 | 5.25″ 2-Way | 60w | 120w | 2.2″/56 mm |
C5 652 | 6.5″ 2-Way | 75w | 150w | 2.4″/61 mm |
C5 572 | 5×7″ 2-Way | 75w | 150w | 2.4″/61 mm |
C5 693 | 6×9″ 3-Way | 75w | 150w | 3.2″/81 mm |
Link to C5 Series ($40.00-$109.00)
C7 Series
The C7 Series Feature:
- Copper Pole Cap /Hybrid Composite Cone
- 28mm Silk Dome Tweeter
- Protective Magnet Boot
- 100 Watts RMS
Loudspeakers
XS Series
The XS-M Series Feature:
- Cast Aluminum Basket
- Oversized CCAW High Temperature Voice Coil
- Treated Reinforced Paper Cone
- Treated Cloth Accordion Surround
- Aluminum Bullet Phase Plug
- Push Terminals
- Mesh Grilles Included
- Packed Individually
Speaker | Size | Voice Coil | Frequency Response | RMS Power | Max Power | Magnet Weight | Mounting Dept |
XS-M6 | 6.5″ | 1.25″ Single 4 Ohm | 70 Hz-12 kHz | 75w | 150w | 26 oz. | 2.9″/75mm |
XS-M8 | 8″ | 2″ Single 4 Ohm | 65 Hz-10 kHz | 125w | 250w | 34 oz. | 3.5″/88mm |
XS-M10 | 10″ | 2″ Single 4 Ohm | 60 Hz-7 kHz | 150w | 300w | 40 oz. | 4.1″/105mm |
Link to XS-M Series ($49.00-$89.00)
The XS-ST1 Feature:
- Precision CNC Aluminum Horn Tweeter
- Chambered Neodymium Motor
- Aluminum Diaphragm W/ 1” CCA Voice Coil
- Capacitor Included With Tweeter For Proper Frequency Cutoff
- Frequency Response: 2800Hz – 28kHz
- Sensitivity: 106dB
- Power Handling: 50W RMS
- Impedance: 4 Ohm / 8 Ohm
Speaker | Size | Voice Coil | Frequency Response | RMS Power | Max Power | Mounting Depth |
XS-ST1 | 3″ | 4/8 Ohm | 2800 Hz-28 kHz | 80w | 160w | 1.9″/48 mm |
XT Pro Series
The XT Pro Series Feature:
- Cast Aluminum Basket
- Oversized CCAW High Temperature Voice Coil
- Carbon Fiber Cone
- Treated Cloth Accordion Surround
- Push Terminals
Link to XT Pro Series ($59.00-$99.00)
Check out the Best 4 Channel Amplifier Post
comments (0)